Shiva Engineering Works
Home | Site Map | Enquiry | Feedback | Contact Us
Google
corner
Company Profile Services Products Our Clients Contacts Us
corner
Textile Spinning and Weaving Spares
     
 

Category

SPINNING SPARES
steep Autoconer Spares
steep TFO Spares
steep Cone & Cheese Winding
steep Ring Frame Spares
steep Rieter Spares
   
WEAVING SPARES
steep Cimmco Spares
steep Sulzer Spares
steep Dornier Spares
steep Picanol Spares
steep Tsudakoma Airjet Spares
steep Dornier Airjet Spares
steep Picanol Solenoid Valves
steep NP Loom Spares
steep Toyota Airjet Spares
   
WEAVING ACCESSORIES
steep Complete Range of Weaving Accessories
   
LOOMS
(As per Cimmco Design & Standard)
Terry Towel (Automatic)
steep Under Pick
steep Automatic
steep Overpick


special offer

 

 

 

 


 

Terry Towel Automatic Loom 72"
(As per Cimmco Design & Standard)


Automatic Loom 72"

RAMING: Deeper frame with double top rail of M.S. channel suitable to mount shah cam side dobby on drive side (L.H.) top rail bracket to mount positive let off motion (pile beam).

DRIVE: Individual con clutch drive with 3 groove loom pulley to suit (‘A’ Section Belt) crank shaft forged out of 50m/m tested steel. One piece having 3” throw, Band Brake.

Crank & Tappet wheel of higher grade material of machined cut teeth.

TAKE UP: 7 Wheel pickles Take-Up motion with all M/c’s cut teeth including ratchet wheel, temple ring roller to catch selvege rest 5 rings of nylon, RH temple provided with cutter.

WORP STOP: 4 Bank sliding type for bottom beam.

PICKING: Side lever under picking system with chilled picking nose & hardened picking bowl with bush, picking stick & side levers provded of laminated wood, Buffers both sides provided of special compressed leather.

LET OFF BOTTOM BEAM: Fully positive let off motion with parabola cam for regulating the let off with the beam dia through beam feeler roller, Let off provided with two rollers. (Plated) of 3 ½” & 4/2” dia on a extended bracket. Bottom beam of 4 3/8” dia with 20” dia beam flange.

PILE BEAM LET OFF: Fully positive let off motion mounted on top rail side brackets, with beam feeler roller to work with beam dia, let off gears machined cut teeth & spring loaded band brake. 2 Nos plated tension rollers, to work with warp tension, 4 3/8” warp beam with 26” dia M.S. beam flanger.

BEAT UP SLEY: Loose reed system sley made on Angle iron with C.I. race ends, special type M.S. reed cap provided with G. Metal bearings for free movement of reed every loose pick . Sley to suit 390x45x34 m/m & 90” Shuttle.

TERRY MOTION: Special terry cam provided on counter shaft with gear ratio 2x1 i.e. 2 pack loose one pick fast. For formation of pile, Stop rod of 1 1/8” dia is conncted through lever with the terry cam to operate reed movement pile hight can be regulated through lever, Handle is provided for dis- connecting the terry motion.

DUCK BILL HITTERS ARE PROVIDED OF STEEL.

WEFT FORK MOTION & FEELER: Side weft fork motion provided shuttle weft feeler motion to operate battery motion on bunch.

BATTERY: Rotary battery (cop change motion) to operate through weft feeler. To suit 190m/m bobbin with ring of 27m/m dia.

END CUTTER IS PROVIDED TO CUT & HOLD THE OUT GOING WEFT,

NOTE: SHEDDING BY SIDE DOBBY AS SUCH NO SHEEDING TAPPET ARE PROVIDED .

 
corner   corner
Home | Company Profile | Services | Products | Site Map | Enquiry | Feedback | Contact Us
Copyright 2010, All Right Reserved. Best viewed in 1024x768 screen resolution in IE 5.0 and above. Site By - Graphics World